MyTriRack Transition Rack Review

There’s a lot of ways you can reduce your total time in triathlon.  The most common being you can swim faster, bike faster, or run faster. To get faster at each of those individual sports you either need to train better (smarter, harder, etc…), or race smarter/better.  There’s really very few ways to reduce your total time without hard work…except, in transition.

Transition is the area everyone loves to ignore – for reasons that I’ve never quite grasped.  Some describe it as ‘free speed’, but ultimately, it’s a more easily obtained reduction in your total race time.  For example, to slice just a minute off of your sprint or olympic distance swim times, would take a fair bit of pool work.  A lot of pool work – ignoring courses that are mis-measured.  It would also take swimming a proper line.  Again, racing smarter.

But transition – transition doesn’t take any additional physical fitness.  There’s no reason a middle of the pack athlete need be any slower in transition than a front of the pack athlete.  It’s just a matter of spending a bit of time at a local school or park at night in an empty parking lot.  But finding that minute in a transition area (either T1 or T2 individually, or across both) – is pretty easy.

I’ve done a lot of that over the past few years.  You’ve read about it here and here.  Even getting The Girl up to speed on it.  And ultimately, that practice has made many of my transitions somewhat respectable (except the time I face-planted).

In order to practice transitions, you don’t need a whole lot.  On a bare bones budget you can do it with a picnic table.  But, you’ll find that you’re ability to simulate a race does increase if you spend a touch bit more.  Thus, you may remember a few years ago I went to Home Depot and built my own transition rack.

It was…to say the least, a piece of work.  A non-pinnacle of modern engineering.  It’s clear my skills lie within computing, not woodworking.  And ultimately, I rarely used it.  I’m sad to day, it did not make the cut for the move here to France.

So back in July, the founder of a small company (MyTriRack) out of the Midwest reached out to me to see what I might think of his transition rack.  It looked sturdy, and only cost $50.  I said I’d be happy to give it a shot, and to send it over.  A few weeks later, the French postal system arrived with a gloriously big box.  Transition rack delivered (Note: by now, I’m reasonably certain our mailman hates us, having to lug racks, trainers and everything else up flights of steps…longing for the days of simple letters).

We took it with us to Eurobike, and then on the way back home we headed out to a lake to go ahead and run through a full transition setup.

P1050831

First though, was the building of the rack.  Since our time was limited, we split up jobs.  I went to take pretty pictures of new products on a dock.  And The Girl had fun putting together the rack.  Which, I realized, I forgot to give her instructions.  Nonetheless, she figured it out.

IMG_7587

Here, for your viewing pleasure, is the sped-up process of her putting it together, in front of a corn field…with a random French Grandma and Grandpa sitting off to the side in fold out chairs 6 feet from her, watching her.  It was funny (for me).

If you didn’t catch it above, also note the random man who stops right in front of the GoPro, and astoundingly we actually see through his legs as she continues setting it up.  Seriously folks, I can’t make this up.

When all was said and done, the end resultant:

IMG_7767

A few things to point out – I found the rack pretty sturdy.  You’ll see in the video later on that it doesn’t move much.  It’s solid.

Second, the rack includes locking rings.  Not the $50 version, but the $80 version.  The rings are actually permanently affixed on the primary horizontal bar.  In the photo below they happened to also be wound through the support bars, but that’s not the permanent part.

IMG_7764

The goal of this is that you can then lock this to a stationary object.  On their site, they use the example of locking it to a car.  Same goes for your bike to the rack, and then rack to something else (car, tree, sibling).  I suppose you could also lock your wetsuit via the arm sleeve.  There’s four rings in total.  And again, the goal of them is to lock onto the main bar, which they are permanently attached to if you bought the higher end model.

IMG_7758

This would be ideal if you were doing looped transition practices outside of view of your goods.  For example, many individuals and teams will do repeat loops – such as bike a loop (for example 3 miles), and then run a loop (for example, 1-2 miles).  And then repeat the whole enchilada a few times over.

IMG_7756

The unit can fit two bikes easily, and four bikes if you use both sides it – though, things would be a bit compressed. But, that’s not terribly unlike most triathlon transition areas.

The rack itself has really five core pieces.  The four side supports which slide out, and the one main beam:

IMG_7759

The whole thing assembles and disassembles in no time.  In total it weighs 11 pounds, or about 4.5 kilos.  I’ve been carrying it around in the box it shipped in, merely because it’s a handy way to transport it.

IMG_7749

And here’s the whole thing packed up, post-transition:

IMG_7036

Now, it’s time to see it in action.  I went ahead and did a complete mock transition practice – from swim to bike to run.  And all the gooey transition stuff inside.  All for your viewing pleasure.  We actually even got a little remote control helicopter to take aerial shots (with The Girl flying it!).  But alas, some sort of video fail occurred there in the recording.  This being one of the last frames it took, right before the action started (and we got more elevation), it stopped:

image

But, all her ground footage worked great – so without further ado, here’s my triathlon transition (no-retakes):

MyTriRack Transition Rack Runthrough

Back to the transition rack at hand, for $50 it’s a pretty good deal.  Yes, you could built something cheaper, though likely not as sturdy, nor would it likely ‘just work’.  In my mind, this is best if you go in on it with a friend or two.  Which means $25 a person.  Plus, that’ll give you motivation to actually practice your transitions (motivation either via friend, or because you bought these).  And I’d be willing to be that at either $25 or $50, you’re going to save far more race time than any most ‘aero’ product can give back to you.

I can’t really think of any ‘complaints’ about the product.  It’s simple, straight forward, and easy to use.  Plus, there’s no firmware to worry about for it, nor any way for the product to give an error message.

With that, feel free to drop any questions below – I’d be happy to get them answered.

FOUND THIS POST USEFUL? SUPPORT THE SITE!

Hopefully, you found this post useful. The website is really a labor of love, so please consider becoming a DC RAINMAKER Supporter. This gets you an ad-free experience, and access to our (mostly) bi-monthly behind-the-scenes video series of “Shed Talkin’”.

Support DCRainMaker - Shop on Amazon

Otherwise, perhaps consider using the below link if shopping on Amazon. As an Amazon Associate, I earn from qualifying purchases. It doesn’t cost you anything extra, but your purchases help support this website a lot. It could simply be buying toilet paper, or this pizza oven we use and love.

Post a Comment

Your email address will not be published. Required fields are marked.
If you would like a profile picture, simply register at Gravatar, which works here on DCR and across the web.

Click here to Subscribe without commenting

Add a picture

*

23 Comments

  1. Toooo late you started undressing the wetsuit. :-))

    And where is the start number? 🙂

  2. Anonymous

    Nice work ray

  3. Anonymous

    What about just getting a sawhorse from Home Depot? $20 cheaper, and it’s yellow.

    link to homedepot.com

  4. Question from a roadie here… what is the deal with transition in Triathlon events? It seems like the most dangerous clusterf*ck imaginable and youtube is replete with examples of unsafe maneuvers, particularly between the swim and bike. It seems like it ought to be possible with chip timers to zero out the transition time, in the interest of safety, with some reasonable minimum time before it counts against you to discourage people from using it as a recovery break.

    Rather than practice a mad dash between events it could be a lot safer and sensible. It is bad for the sport that it is so well known for transition calamity.

  5. Ron

    Duane, If you’re talking safe and sensible, those sprint finishes at road races are the real definition of a cluster F#$#$. Why don’t they just capture the finish positions about 1K from the finish and have the field come across the line holding hands.. 🙂

  6. Anonymous

    When you jump of your bike you should put the right leg just forward between the left and the bike. Crossing the right leg behind the left is makes you brake to much not to fall over.
    / Michael

  7. Touche, Ron. 🙂 I can’t disagree that sprint finishes are dangerous, but I do think my modest suggestion could do a world of good to improve safety unless I misunderstand how the chip timer systems work. I gather that they are already recording splits at each point. Suppose you gave 5 minutes (or some arbitrary) transition time then people could focus more on safety. Something’s gotta give because it makes no sense the way it is done now.

  8. Ray,
    I’m not sure your information on racking the bike before removing the helmet is accurate.
    Here is an excerpt of the USA Triathlon rules. Please note that you are only required to have the chin-strap fastened when on the bicycle. Now, obviously, races are free to implement whatever additional rules they see fit, but most races (in the U.S., follow USAT rules)

    Best,
    Brian

    5.9 Helmets.
    b. Chin Strap Violations. The helmet must be fastened before the participant first mounts the bicycle, at all times when the participant is on the bicycle, and must not be unfastened until the participant has dismounted. Any violation of this Section 5.9(b) which occurs while the participant is in the transition area shall result in a variable time penalty. Any other violation of this Section shall result in disqualification. This Section 5.9(b) shall be enforced at all times while at the event site on race day.

  9. Hi Brian-

    Hmm, that’s a good point. I forgot, it is in ITU, but not officially for USAT in AG. However, I’ve also been to numerous races that have enforced the helmet rack rule (as I described it), beyond the USAT rules. Races can technically do that.

    But yes, good point on the official rules.

    Hi Anon-
    RE: The Sawhorse

    The only challenge is whether your bike will fit below it. I’d guess probably just a hair too short. But I’d have to take out my measuring tape and see if it’s shorter than about 30-32″ (34″ is the height of that, but then you still have to get below the bottom of the crossbeam).

    Thanks all!

  10. Anonymous

    Fellow Triathlete and Ironman competitors. Please help me spread the word for Amy and her recovery. 6x IM Kona finisher and 6x All All American hit by a semi gravel hauler over a week ago. Still in a coma trying to overcome. SOAS has made wristbands to support her. Would really appreciate the support. the link at the bottom of the SOAS page has teh Detroit News video from last Friday – time to pull together!;
    link to shop.soasracing.com

  11. Bob

    Ray,

    I have the same Cervelo P3 and if I rack by the nose of the saddle I have to tilt the bike sideways at a 45 degree angle to get the bike under the rack. I’ve been to one triathlon in two years that had racks high enough where clearance wasn’t an issue.

    I’m going to try the ISM Adamo saddle with the lip in the back of the saddle which is designed to hold it on the transition rack. Have you tested any of these style saddles?

    Bob

  12. Anonymous

    Bob, I know exactly what you mean about trouble getting under the bar. And crowded racks make the problem much worse. Maybe it’s just us taller guys with larger bikes. An Adamo saddle addresses a specific problem. If you are happy with the comfort of your current saddle, I would not change. If you do need an Adamo, also check out Cobb. Same general idea but less radical

    P.S. good cause or not, spam is spam, Anon 5:16p.m.

  13. I have to ask: did you say to Bertie when she finished building the thing “nice rack”?

  14. Jeff

    Ray, in a previous transition post, you said you rolled up socks and put them on. Now you are clearly going sans socks. Any thoughts on that? Did you need any special gear to go without socks or do you just need to get used to it?

  15. I built my own with 1.5″ conduit (10 ft section) and 3/4″ legs for about $23 from Home depot. Plus mine is 10ft across. Great for fellow tri buddies to practice at the same time. 🙂

  16. DL

    Hi – anyone got ideas about how to keep your running shoes opened up ready if you have elastic laces?

  17. Anonymous

    Very nice bike! And what a nice car! Which brand is your new station wagon from?

  18. Jusy ordered me one!

    How do you like the Jetta?

  19. Hi Anon/Stuart-

    Nope, just a rental, not mine. But, it was a nice little car. 🙂

    Not a Jetta though, it was a European brand if I remember correctly (Peugeot).

  20. len

    awesome transition video. how do you practice getting in and out of bike shoes in motion?

  21. David

    Do you know whatever happened to the company? The domain mytrirack.com is now for sale.

  22. Great article – we do however offer a Rak-it which is designed to help improve your transition further. The smaller bikes tend to swing around on a transition rack, by racking your bike on the back of the saddle using a Rack-it, your bike will be more secure and you can unrack faster.

    Take a look at our website for some further information – link to tri-trained.co.uk