JUMP TO:

5 Random Things I Did This Past Weekend

Since I’ve got less than 45 minutes until my flight departs, we’re going to go bullet-point style to cover the randomness that was this weekend:

(Edit: Ok, my attempt to publish before departure was thwarted by my little friend…slow internet.)

#1: I rode around a bit, doing some power meter comparisons

DSC_0694

I went out for a few rides, roughly an hour each, capturing power meter data on the Pioneer power meter.  I’ve been riding it off and on since earlier this winter.  I’m hoping though that in the next few weeks I’ll have a fair bit more at-home time to wrap things up and then get a review published.

image

image

It’s a bit tricky in that they dropped the entire pre-set bike in, so I had to tweak a few things in order to get power data.  I swapped out the pedals for Vector ones.  But that only gives me two data sources while outdoors – for power meter testing I really like to have a minimum of three data sources.  Thus allowing me to at least trend which of the units I think are right.

Simply stick on the PowerTap wheel you say?  Well, I would have except the provided bike included an 11-speed cassette in the rear, and my PT hub is 9-speed.  Thus my shifting was crap.  So I ordered  a new 11-speed cassette for my PT hub that I’ll pickup in the states this week.  Thus resolving my outdoor lack of power issue.

DSC_0661

The only downside to doing power meter testing with the Pioneer is that I have to switch the unit into ‘ANT+’ compatible mode.  On the Pioneer, it transmits power data in one of two ways:

Option 1: Native Pioneer mode.  In this mode it uses ANT to send the full left/right data to the Pioneer head unit.  It does so in a manner that provides far more data than other head units can accept – so both the type and quantity of data is dramatically increased.  In doing so, they use ANT and not ANT+.  Thus, a Garmin or any of my other tools can’t read the data stream.

 

Option 2: Switch it into ‘ANT+’ mode.  When you do this, it acts as a normal ANT+ power meter and transmits total power and left/right power.  But it doesn’t transmit some of the more ‘interesting’ things that Option 1 provides.  But it’s realistically the only way I can get comparative data out of the unit.  While I could technically have the data exported afterwards in software, that’s an administrative mess.  First the data isn’t time-code aligned, so I’ve got to re-do that.  Then I have to re-format it to match into the tools I use for comparison.  I’ve long since learned years ago that when doing power meter comparisons minimizing the amount of data cleanup you have to do is critical to successful and efficient analysis.

To switch between the modes you need to remove the battery compartments on each unit and flip a tiny little switch.  It’s not a big deal.  Just four screws, but it’s a bit of a bummer to have to do semi-frequently.

Finally, I was also testing a few other things while on the bike…but more on that some other time.

#2: I gathered power curve data for the Elite Turbo Muin Trainer

I’ve had a few requests lately to get power curve data for the Elite Muin trainer.  That’s the trainer that’s quite a bit quieter than most other units on the market.  ‘Power Curve’ data is data that represents the power to speed profile for a given trainer.  Not all trainers can have a power curve (for example, ones where you can control the resistance manually or through a computer).  But fluid ones like the Muin can – where a specific speed always equals a specific wattage.

To do so I had a few power meters on my bike (Quarq ELSA + Stages), and then I had speed sensors setup as well.  This would record the hub-speed (effectively the wheel speed) as specified by Elite.   From there I’d collect samples at a variety of speeds.

DSC_0668

I did this post-tempo run, so I was a wee bit fatigued.  But I got speeds ranging from a few MPH to 20MPH.  Which capped out at about 600w.  Not too shabby!

Ultimately, the data isn’t terribly exciting.  That data will then find its way into products like TrainerRoad and others.  I provide the power curve data free for anyone that wants to download it.  You’ll find it at the end of my most recent post on the Muin in the comments.

#3: I flew to Munich…for 90 minutes.

On the list of things that was planned for my weekend when Friday rolled around – Munich was definitely not on them.  But, some things got tweaked and in order to get what I needed for a few posts I swung up there briefly to visit the show floor of ISPO – the massive sport & fitness show.  It’s like Eurobike…but on steroids.

20140126_095912402_iOS

I flew up on a 7:15AM flight, and landed into snowy Munich around 9AM.  From there it was straight to the convention center for about 90 minutes, and then right back to the airport for a flight just after 12PM.  Efficiency at its finest!

20140126_094915386_iOS

Though, I suppose I was in Munich slightly longer than 90 minutes, but it was only 90 minutes of usable time…so that’s how I’m looking at it.

20140126_100329232_iOS

I would have loved to stay longer at the show – and will definitely put it on the radar for next year.  But my schedule was just too busy to accommodate any more time there unfortunately.

#4: We had a small dinner party

Some folks have asked for more food photos in posts, harkening back to many of my past posts.  Thus, here’s a few from Saturday night.  We had some of the CupCakery employees over, as well as a few friends, plus The Girl’s Dad had been in town.

DSC_0713

He cooked up most of the vegetables and meats.  Almost all of which he picked up at the outdoor market around the corner earlier in the day.

DSC_0717

Meanwhile, The Girl whipped up a quick carrot cake (seen to the left), while one of our bakers made a French King Cake, which is similar to the New Orleans variant whereby a small little toy is placed inside.  There’s also a bit of a customary game that goes along with the serving of said cake and the little toy.

DSC_0719

Both were great, though, I was definitely regretting the extra piece (or two) of cake the next morning about mid-way through my long run.

#5: I went for a 16-mile sunrise run before my flight this morning

Last but definitely not least was this morning’s long run.  While it was originally scheduled for yesterday, with the last minute trip to ISPO things were going to get kinda ugly schedule-wise for the long run the same day.  Sliding it to today didn’t have any major effect on my overall training schedule.  Given long runs tend to be one of the most important workouts of the week, it’s key that you get them in – so I didn’t want to miss it.

I woke up around 6:45AM and was out the door by 7:00AM.  I had to put back together my CamelBak after cleaning, so that caused a slight delay of game.

Stepping outside, it was dark, a bit chilly (39°F), and a wee bit windy.  But, certainly a heck of a lot better than yesterday afternoon where it was raining sideways.

VIRB0292

I headed out down along the river, mostly in an attempt to avoid having to stop and go with cross streets/bridges.  Of course, that really just resulted in being in a big wind-tunnel as the wind settled into the banks of the river.

As I neared the Eiffel Tower I noticed the lights were out.  I guess I never really noticed that they turn off the lights at some point in the night.

VIRB0295

I’d end up wandering into the park around Longchamp and then ultimately coming back up towards the Arc de Triomphe.

VIRB0299

From there I’d run down the Champs-Élysées and into the Tuileries – which is the large garden next to the Louvre.  It was pretty much desolate.

VIRB0311

VIRB0325

At that point it was past the Louvre itself and then through the building to skip over to the other side.

VIRB0329

I’d wrap up the 16 miles in about 1hr and 55min, right back where I started.  Definitely no time this morning to do any sort of point to point journey, as I couldn’t afford spending an extra 20+ minutes getting back home via the subway.

From there it was a super-quick shower and then a ride out to the airport for my flight across the pond.  A short trip this time, just 48 hours thankfully.

With that, thanks for reading!  Hope everyone has a great week ahead!

FOUND THIS POST USEFUL? SUPPORT THE SITE!

Hopefully, you found this post useful. The website is really a labor of love, so please consider becoming a DC RAINMAKER Supporter. This gets you an ad-free experience, and access to our (mostly) bi-monthly behind-the-scenes video series of “Shed Talkin’”.

Support DCRainMaker - Shop on Amazon

Otherwise, perhaps consider using the below link if shopping on Amazon. As an Amazon Associate, I earn from qualifying purchases. It doesn’t cost you anything extra, but your purchases help support this website a lot. It could simply be buying toilet paper, or this pizza oven we use and love.

Post a Comment

Your email address will not be published. Required fields are marked.
If you would like a profile picture, simply register at Gravatar, which works here on DCR and across the web.

Click here to Subscribe without commenting

Add a picture

*

34 Comments

  1. Tyler

    Wow, when do you sleep?
    On the plane perhaps?
    Impressed with how many simultaneous things you have going, especially the product testing that you don’t get paid for.

  2. Paul Dixon

    Wow, a 2CV (picture #2). Haven’t seen one of those in years. At ‘best’ that poor car has had 24 years of Parisian driving/parking and is still alive!!

  3. EB

    Hi Ray,

    You say;

    “But fluid ones like the Muin can – where a specific speed always equals a specific wattage.”

    I may be entirely wrong but I thought fluid turbos worked by forcing a fluid through a hole, which generates a resistance, and that they were susceptible to temperature changes of the fluid. Have they got fully around this problem?

    • In most cases the fluid tends to level out after about 10-15 minutes. Thus, I did about 10 minutes on the trainer (a little more actually including some dorking around) before I started creating my power curve.

      Most trainers (fluid, magnetic, and otherwise), tend to have some sort of ‘warm-up’ period. Usually 10-15 minutes is pretty good.

  4. guscrown

    I just want to say that I am in complete “awe” of your ability to travel around the world and still have energy to run, or the other way around too: to have your long runs and still be able to travel around. After my long runs I just want to lay in bed and read books all day. And jetlag is always a terrible burden for weeks in my case. Are you nor from this planet?

  5. Wow I don’t know how you do it all. Also what do you use to create posts while on the go?

    • Thanks Adam. I use Windows Live Writer. It’s free and allows me to compose offline, including inserting images, etc… It works with all the major blog platforms. I’d probably stop blogging if I couldn’t use it. Couldn’t imagine trying to write these posts with web tools.

    • That’s what got my wondering. I enjoy reading your blog very much and started my own not long ago and although I don’t travel around a lot I do struggle to make updates with always needing to be online and constantly saving drafts.

  6. falconeye

    Ah, if you had 30 more minutes in munich, you could have had the time to test my DJI Phantom :-).
    But perhaps you come back to munich to the Oktoberfest for some good strong beer?

  7. MATTHEW Cortez

    Nice Giant

  8. Jake

    You get a new road bike?

  9. Jackson

    As you can see many of us admire you for your ability to juggle so much. Would be really intrigued with some “lifehacker” posts. For example: what’s in your messenger bag, how you manage your schedule, your favorite apps etc.

  10. Matthias

    Hi Ray,

    I always wonder, when I read about your jogs around Paris: Don’t you have to stop and wait at stop lights every couple of minutes?

    Cheers
    Matthias

    • I tweak my routes to avoid them. So, for example, on the outbound of the route I ran along the river, which sets itself down below street level – so zero traffic stops for miles. Then I head into the park, so again, no lights.

      Finally, after the Arc I did hit a few lights briefly coming down the Champs-Élysées, but once I hit the gardens you’re home free again. So I think I may have had 2-3 brief stops the entire run.

  11. I always like your posts.

    Just one little comment: you should put the french name of the cake! Galette de rois! it is a bit different than cake of the king…. 😛

    nevertheless it looked like a really nice saturday night! have a nice week!

  12. Dave Schenk

    Hi Ray,

    Thanks for providing the Turbo Muin data!

    Hopefully the Trainer Road people can update the virtual power curve soon, right now I’m seeing a 80-100 watt difference in comparison to my now sold powertap 🙁

    Thanks again, Dave

  13. Julien

    Ray

    Great post.
    Where did you go bike for pic #3 ?
    What are your usual training or testing grounds ?

    Thanks

    • That’s in the Bois de Vincennes, the triangle ‘loop’ seen here; link to dcrainmaker.com

      I often use it for training (and testing). It’s great because it’s traffic free, so you can go around and around without any car traffic. From a running standpoint it’s awesome. You could run a half marathon’s worth of distance in there easily without repeating yourself.

  14. MATTHEW Cortez

    I thought that Giant was one of yours.
    I was thinking my Fuji equipped with forerunner 310xt watch, garmin cadence sensor that works sometimes at best and cell phone as gps navigation devise was starting to become really pitiful.
    I feel better now.
    Ride or die:’-)

  15. Matthew Cortez

    Tastycakes!

  16. Matt

    Hello, please what model of bike do you have? Is that a Giant Advanced Defy? Looking for a light that works on that seatpost

  17. TheBlackKite

    Hi Ray,
    I love to read your blog, always a pleasure to surf by.
    I have a question that you probably answered already regarding your pictures, do you take them while running or do you actually stop? Are you still using the Lumix?

    • I take them all while running. The only time I don’t would actually be that single picture of the Eiffel tower at night (and the one pre-run obviously). Otherwise, I just keep on trucking.

      I’ve sorta kept the Lumix in the stable the last few months and have been using the VIRB. I like that I can just charge it with a USB cable, so I don’t have to remember battery charger. Also like that I can use it as a backup activity file as well.

  18. luis fernando oliveira

    The dark Eiffel Tower was easily one of the greatest disappointments of my running tourist career. Worse, I was standing at the Trocadero and could not find the Tower for the life in me. Depressing. So much for the City of Lights moniker.

    • TheBlackKite

      Thanks Ray for the clarification. I want to take pictures during my runs and put them on a blog, just the pictures actually, you kind of inspired me 😉
      So with your huge experience regarding this what would you recommend? First I was up for the Lumix or similar but now I’m wondering if an action cam would make more sense maybe?

      cheers

    • It depends a little bit on what you plan to do with the camera. If you also want to use it outside of sports, then the Lumix is better. But if you’re plan is purely for sport-use, then I’d go the action camera route. Either the VIRB or GoPro. I find the VIRB nice because it does have the little screen for quickly validating the shot was good.

  19. Ray, sorry I missed you in Munich at the ISPO. It is huge, really too much to see and absorb in 3-4 days let alone 90 minutes. You are truly crazy. What I noticed this year was that many of the larger brands were not present. Polar was about the only one. No Garmin, No Timex, No Suunto, no O-synce, no Wahoo. 4iii and was there. TomTom was showing up big with lots of extras outdoor advertising for their GPS watch. I’d love to show you a few of my secret spots in Munich, if you ever slow down for a minute.

    • Yeah. Honestly, if I was in those companies shoes – I’d probably skip ISPO too. Realistically they did Eurobike + Interbike (late September). Then they all did CES (three weeks prior), and many of those are doing MWC here in four weeks. Given that, for many of them it probably doesn’t make a lot of sense, as odd as it may seem.

  20. Rob Wilkinson

    Can you identify the source of your drive?

    Not merely from a training perspective but also from an outlook on life. As evident in your work, you certainly have a passion to “do”. I ask because mine is ever synonymous with the ebb and flow of the tide: coming and going.

    Cheers and thanks for all of your hard work; it is greatly beneficial, informative, and appreciated.

    • I enjoy getting things done, or at least, I enjoy attempting to be efficient at getting things done. There’s lots of things I’m interested in, some surface on the blog – many others don’t. I get interested in some things and then that fades, like your ebb and flow.

      My version of relaxing is hanging out and watching Mythbusters or the like, mindless TV. I tend to get somewhat restless just sitting on a beach, unless I find myself in a good book (or just sleeping).