Interbike Exhibition Day 3 Overview

While the show floor may have closed here at Interbike, my coverage hasn’t quite ended.  I still have numerous posts to write, edit and publish – which will keep on trickling out over the next few days.  Still in the hopper are posts covering the following:

TACX Trainer
4iiii ANT+ Heads Up Display
iBike Dash
PedalBrain
ANT+ enabled Fitness/Gym Equipment Tour
LeMond ANT+ Trainer
Brim Brothers Interview with Founder Barry Redmond
Timex Global Trainer Chat & Futures
Tunebug/Vibe (cycling music system)
Wahoo Bike Sensor Case
Movmoda Performance Lingerie Review by The Girl
Power Meter Seminar Recap and session videos

Now that I type that all out, holy cow I still have a lot to write!  So with that in mind…let’s talk about where I wandered Friday.

On the last day of the show – things get quiet pretty quick.  While the below picture was taken mid-morning…it was fairly sparse throughout most of the day.

IMG_0993

I didn’t have a chance to mention it earlier in the week, but when it comes to display booths at Interbike, the mountain bike guys get all the props for much cooler booths than everyone else.

IMG_0995

Though, one surefire way to increase your cool factor is to install some form of LCD/Flat Screen display and let people interact with it.  In this case, the TACX booth – which I spent a fair bit of time in.  Look for my write-up on that experience shortly.

IMG_1004

While the Avia booth didn’t have any trees in it – it did have a bike magically hanging from the ceiling – so they get props for that.  In the picture below it may look like it’s resting on something…but nope – just levitating with the assistance of some wires.

IMG_1027

In Thursday’s Day 2 Wrap-up I forgot to actually show the top of the weather sealed iPhone bike case from Wahoo Fitness, and a few folks e-mailed and asked for pics…thus…pics:

IMG_1035

Speaking of Wahoo – I spent a bit of time with Ransom, who develops iMobile Intervals.  I’ve been playing with this quite a bit lately, as it allows me to actually stream in real-time my ANT+ data over the internet via my iPhone, along with location data…and even do so on my own page.

IMG_1034image

After chatting with Ransom, I went about 20 feet to my left and talked to the folks from Tunebug.  They’ve created a helmet speaker that’s both safe…and functional.  It clips on top of your helmet and still allows you to hear all the cars/noise/etc… around you without any problem – while also giving you some tunes.  It connects via Bluetooth, which is pretty sweet.  They gave me some demo product to try out, so I’ll report back and let ya’ll know how it works out.

IMG_1037

Next I hit-up GoPro and took a look at their sports camera system.  While they take the edge on waterproofing (and likely video quality), I think right now I’d go with Contour and their integrated GPS product they just announced.  Very very cool.

IMG_1040

Speaking of integration – I had a good chat with the folks from 4iiii (pronounced Four-eye) about their new Heads Up Display ANT+ system.  These glasses for $149 will display your ANT+ data (including power, heart rate, cadence and speed) on the bottom rim of your glasses.  It uses a multi-colored LED system and integrates with Training Peaks.  It bases it on predefined workouts and zones that you download to the glasses using micro-USB.

The goal of the product is to keep you from looking down at your bike computer and crashing (the guy I talked to was actually an Ironman athlete himself) – thus allowing you to see the LED lights in your peripheral vision.  They noted that while at first they looked into actual LED digits (i.e. displaying 22MPH), but that required a refocusing of your eye from far to near, and thus didn’t really make it any safer.  Whereas the lights don’t require any eye refocusing.  You just tap the side of the glasses if you want to show a different metric, and it’ll audibly tell you as well.

I’ll have more on them later this week, as I’ll be meeting up with them up in Calgary on Wednesday at the ANT+ Symposium.

IMG_1043

Onto something different…again I point out that anything related to mountain bikes is just cooler.  In this case, this bike mount system for cars from Sea Sucker doesn’t require any pain in the butt components – just vacuum mounts straight to your car wherever you want.

IMG_1050

I also had a chance to swing by SRM’s booth…mostly just to look at their really expensive power meters…well, that and their pretty colorful PCVII displays.

IMG_1066IMG_1073

Of the triathlon company’s who were there, De Soto takes the cake for coolest booth sign.

IMG_1081

…though Knog takes the cake for just flat out weirdest.  I think they were going for the Beijing Olympic Water Cube look.

IMG_1084

And last but not least…when all else fails with your bike, you can just make a flower pot holder out of it.

IMG_1087

Thanks for reading…and hang onto your hats – I’ve got lots more on the way…

(Minor PS – This was my first post from 35,000 feet aboard a flight back to DC…woohoo!)

FOUND THIS POST USEFUL? SUPPORT THE SITE!

Hopefully, you found this post useful. The website is really a labor of love, so please consider becoming a DC RAINMAKER Supporter. This gets you an ad-free experience, and access to our (mostly) bi-monthly behind-the-scenes video series of “Shed Talkin’”.

Support DCRainMaker - Shop on Amazon

Otherwise, perhaps consider using the below link if shopping on Amazon. As an Amazon Associate, I earn from qualifying purchases. It doesn’t cost you anything extra, but your purchases help support this website a lot. It could simply be buying toilet paper, or this pizza oven we use and love.

Tags:

Post a Comment

Your email address will not be published. Required fields are marked.
If you would like a profile picture, simply register at Gravatar, which works here on DCR and across the web.

Click here to Subscribe without commenting

Add a picture

*

2 Comments

  1. I’m excited about the helmet speaker (even if it looks completely weird). Looking forward to your review!

  2. I am interested to hear from helmet manufacturers how this may affect the distribution of forces in an impact.

    In addition, I hope the method of attachment to the helmet is slight enough so that it doesn’t significantly increase the chance of neck fracture.

    Scenarios are easy to envision where this would “contribute” to a dangerous increase in flexion.

    In contrast to the pessimistic view I express above, this may have the potential to save many lives for those intent on riding with their tunes.